From the ground, it may appear that the Upvc soffits and fascia just need a new coat of paint. But once you get up close and look closely, it may become obvious that they’re beyond repair and need to be replaced.You can hire a upvc soffit and fascia company to do this for you or you could do it yourself if your a DIY enthusiast .
The purpose of Upvc soffits and fascia on your home is to protect the roof rafters and joists from the ravages of the British weather. It is important to keep the Fascia and Soffit in good condition to prevent structural damage to the hidden roof perimeter.
When working from, or in this case, near the roofline for any length of time, it’s a good idea to set up scaffolding. Scaffolding is safer and easier than working off ladders and will save a lot of time. You can use a pair of fiberglass extension ladders with a couple of jacks to support an aluminum walkway.
Carefully lift back the first row of tiles to fully inspect the eaves for the accurate removal of old fascias, Soffits and gutter.
Pry off the Upvc fascia board along the eave and clean out any debris behind it. fit new UPVC rafter end sprockets. This ensures a true straight continuous run and also give a strong fix for the new Upvc soffits and fascia and guttering.
install eaves guard trays which come with a unique 3 in 1 system. The rigid UPVC tray will replace traditional bio degradable felt. It also has a hidden over fascia ventilator that will provide adequate ventilation to the eaves.
Begin installing your Upvc soffits and fascia using white stainless steel fittings.
You can now carefully install new UPVC guttering and downpipes. Make sure you check for accurate flow rate and capacity on all guttering and downpipes during installation.
Gutter brackets tend to hold a bit better than the “spike” (nail-through) fasteners. However, both are commonly used and shouldn’t be a problem if the Upvc fascia board and rafter tails are in good shape and the gutter isn’t bent.
Tack the high end of the gutter in place. Using a level, slope the gutter slightly down toward the downspout. Double-check all along the gutter to make sure it has some downward flow.
Secure the gutter and attach the brackets. Nail the brackets at the rafter tails and under the shingles so the nail head isn’t exposed. Use roof cement around the nailhead to prevent any leaking and around the lifted shingles to prevent curling.
Now you have fitted your Upvc soffits and fascia and guttering you will have a maintenence free roofline for many many years.
Sos Roofline systems are a Upvc fascia boards company replacing Upvc fascias and soffits in the Cheshire and Merseyside areas of the UK
Find crucial suggestions in the sphere of web traffic - welcome to your individual knowledge pack.
Article Feeder is Sponsored by Cash for Coins the easy way to exchange euro coin.
